Disinfection Uvc Led Modules

OEM and ODM service UVC LED PCBA service Part number: AL-PFD02UVC01-DAA / AL-PFD02UVC01-DBA
Chat Now

Product Details

Disinfection uvc led modules

SMD UVC led modules for sterilization and disinfection, different powers are available. Suitable for indoor, public places and other venues. We could design PCB and manufacture according to customer's requirements.

PART NO.: AL-PFD02UVC01-DAA / AL-PFD02UVC01-DBA

UVC led with 20mm star PCB board, with IC circuit or not


AL-PFD02UVC01-DAA Features :

1. Constant-current Driver. 

2. Emitting Color: UVC. 

3. Aluminum PCB. 

4. Convenient installation.

uvc led module

Notes:

1. All dimensions are in mm.

2. Tolerance is ±0.25mm unless otherwise noted.

uvc led for air sterilization

Technical data sheet:

Electrical and Optical Characteristics:

ParameterSymbolTest ConditionMin.Typ.Max.Unit
Power DissipationPdIF=100mA-0.8-W
Radiated FluxΦeIF=100mA710-mW
Radiant IrradianceEeIF=100mA-0.7-mW/cm2
Peak WavelengthΛpIF=100mA275280285nm
Spectrum Line HalfwidthΔλIF=100mA-11-nm
Forward VoltageVFIF=100mA5.0
8.0V
Viewing Angle2θ1/2IF=100mA-120-Deg
Reverse CurrentIRV R=5V--50uA


AL-PFD02UVC01-DBA Features :

1. Driver: DC2.8-5.5V. 

2. Emitting Color: UVC. 

3. Aluminum PCB. 

4. Convenient installation.

chip uvc led

Notes:

1. All dimensions are in mm.

2. Tolerance is ±0.25mm unless otherwise noted.

high power uvc leds

Electrical and Optical Characteristics:

ParameterSymbolTest ConditionMin.Typ.Max.Unit
Power DissipationPdVF: 5V-0.85-W
Radiated FluxΦeVF: 5V710-mW
Radiant IrradianceEeVF: 5V-0.7-mW/cm2
Peak WavelengthΛpVF: 5V275280285nm
Spectrum Line HalfwidthΔλVF: 5V-11-nm
Forward VoltageVFIF=100mA (LED)2.8-5.5V
Viewing Angle2θ1/2VF: 5V-120-Deg
Reverse CurrentIRV R=5V--50uA

Note:

 1. Forward voltage measurement allowance is ± 0.2V.

2. Radiant flux measurement allowance is ± 10%.

3. Irradiance tested at a distance 10mm from Al reflector.

4. Wavelength measurement allowance is ± 3nm.


These two module, we all have some samples stock. If need to order big quantity, we also can provide fast delivery. If need customized PCB module service, this is also OK. We can provide a full set of services from PCB design, production to testing


Usage Notice:

It is recommend to use low temperature solder paste for reflow, and the temperature curve is shown in the following diagram.

UV C LED Disinfection

UV-C led

uvc led



FAQ:

Q1. Can I have a smaple order first?

A1: Yes, we welcome sample order to test and check quality.

Q2. Do you have MOQ?

A2: First sample order don't have MOQ, Low MOQ for formal order.

Q3: What about lead time?

A3: For sample, we have stock. Normally lead time is about 1-2 weeks.

Q4: How to process one order?

A4: Firstly let us know your requirements or application. Secondly we quote accoring to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly we arrange the production.

Q5: How long guarantee you offer?

A5: Normally we offer 3 years guarantee.

Q6: How to deal with the faulty?

A6: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.


3535 uvc led


For UV sterilizer, water purification and disinfection and other medical application, we have many different power UVC leds, also have PCBA service. 


Hot Tags: disinfection uvc led modules, China, manufacturers, wholesale, customized, bulk, in stock, free sample

Inquiry

You Might Also Like