Ultraviolet 5mm UV led
Dongguan Zhiding Electronics Technology Co., Ltd Provide high quality 5mm dip UV 400-410nm led. We have stock, fast delivery time is our advantage.
5mm UV led Features:
Chip Material: InGaN
Lens Color: Water Clear
Source Color: Porple
The product itself will remain within RoHs compliant version
RoHS Approved 5mm Round DIP UV LED Lamp
1. Medical equipment, Nail dryer register form;
2. Decoration, gifts, signage, , flashlights, signaling devices, information panels;
4. Lighting of liquid crystal displays of mobile phones, calculators, PDAs, printers, bicycles, toys, lighting switches;
6. Commercial outdoor advertising;
7. Front panel indicator and general purpose.
Take note of the following in use of LED
Temperature in use
Since the light generated inside the LED needs to be emitted to outside efficiently, a resin with high light transparency in used; therefore, additives to improve the heat resistance or moisture resistance(since gel, etc) which are used for semiconductor products such as transistors cannot be added to the resin.
Consequently, the heat resistant ability of the resin used for LED is usually low; therefore, please be careful on the following during use.
Avoid applying external force, stress, and excessive vibration to the resins and terminals at high temperature. The glass transition temperature of epoxy resin used for the LED is approximately 120-130 ℃.
At a temperature exceeding this limit, the coefficient of liner expansion of the resin doubles or more compared to that at normal temperature and the resin is softened.
If external force or stress is applied at that time, it may cause a wire rupture.
More high power UV LEDs for customer's choose
1. 3 years warranty
2. 5 years technical service team
3.professional sales team
4.Free Sample is available
6.Aiming at the consult of "high quality, zero defect", give you the best quality, best service.
Pre-sales: recommend suitable specifications according to customer requirements, customers test samples after confirming specifications;
Sales: arrange production according to the quantity of customer demand, follow up the production progress and feedback to the customer. After the production is completed, coordinate with the customer to arrange the transport mode and follow up the transportation situation until the customer signs the goods;
After-sales: Follow-up the use of the products.